"""
grdproject - Forward and inverse map transformation of grids.
"""
from pygmt.clib import Session
from pygmt.exceptions import GMTInvalidInput
from pygmt.helpers import (
GMTTempFile,
build_arg_string,
fmt_docstring,
kwargs_to_strings,
use_alias,
)
from pygmt.io import load_dataarray
__doctest_skip__ = ["grdproject"]
[docs]@fmt_docstring
@use_alias(
C="center",
D="spacing",
E="dpi",
F="scaling",
G="outgrid",
J="projection",
I="inverse",
M="unit",
R="region",
V="verbose",
n="interpolation",
r="registration",
)
@kwargs_to_strings(C="sequence", D="sequence", R="sequence")
def grdproject(grid, **kwargs):
r"""
Change projection of gridded data between geographical and rectangular.
This module will project a geographical gridded data set onto a
rectangular grid. If ``inverse`` is ``True``, it will project a
rectangular coordinate system to a geographic system. To obtain the value
at each new node, its location is inversely projected back onto the input
grid after which a value is interpolated between the surrounding input
grid values. By default bi-cubic interpolation is used. Aliasing is
avoided by also forward projecting the input grid nodes. If two or more
nodes are projected onto the same new node, their average will dominate in
the calculation of the new node value. Interpolation and aliasing is
controlled with the ``interpolation`` option. The new node spacing may be
determined in one of several ways by specifying the grid spacing, number
of nodes, or resolution. Nodes not constrained by input data are set to
NaN. The ``region`` parameter can be used to select a map region larger or
smaller than that implied by the extent of the grid file.
{aliases}
Parameters
----------
grid : str or xarray.DataArray
The file name of the input grid or the grid loaded as a DataArray.
outgrid : str or None
The name of the output netCDF file with extension .nc to store the grid
in.
inverse : bool
When set to ``True`` transforms grid from rectangular to
geographical [Default is False].
{J}
{R}
center : str or list
[*dx*, *dy*].
Let projected coordinates be relative to projection center [Default
is relative to lower left corner]. Optionally, add offsets in the
projected units to be added (or subtracted when ``inverse`` is set) to
(from) the projected coordinates, such as false eastings and
northings for particular projection zones [0/0].
{I}
dpi : int
Set the resolution for the new grid in dots per inch.
scaling : str
[**c**\|\ **i**\|\ **p**\|\ **e**\|\ **f**\|\
**k**\|\ **M**\|\ **n**\|\ **u**].
Force 1:1 scaling, i.e., output or output data are in actual projected
meters [**e**]. To specify other units, append **f** (foot),
**k** (km), **M** (statute mile), **n** (nautical mile), **u**
(US survey foot), **i** (inch), **c** (cm), or **p** (point).
unit : str
Append **c**, **i**, or **p** to indicate that cm, inch, or point
should be the projected measure unit. Cannot be used with ``scaling``.
{V}
{n}
{r}
Returns
-------
ret: xarray.DataArray or None
Return type depends on whether the ``outgrid`` parameter is set:
- :class:`xarray.DataArray` if ``outgrid`` is not set
- None if ``outgrid`` is set (grid output will be stored in file set by
``outgrid``)
Example
-------
>>> import pygmt
>>> # Load a grid of @earth_relief_30m data, with an x-range of 10 to 30,
>>> # and a y-range of 15 to 25
>>> grid = pygmt.datasets.load_earth_relief(
... resolution="30m", region=[10, 30, 15, 25]
... )
>>> # Create a new grid from the input grid, set the projection to
>>> # Mercator, and set inverse to "True" to change from "geographic"
>>> # to "rectangular"
>>> new_grid = pygmt.grdproject(grid=grid, projection="M10c", inverse=True)
"""
if "J" not in kwargs:
raise GMTInvalidInput("The projection must be specified.")
with GMTTempFile(suffix=".nc") as tmpfile:
with Session() as lib:
file_context = lib.virtualfile_from_data(check_kind="raster", data=grid)
with file_context as infile:
if "G" not in kwargs: # if outgrid is unset, output to tempfile
kwargs.update({"G": tmpfile.name})
outgrid = kwargs["G"]
arg_str = " ".join([infile, build_arg_string(kwargs)])
lib.call_module("grdproject", arg_str)
return load_dataarray(outgrid) if outgrid == tmpfile.name else None