"""
grdimage - Plot grids or images.
"""
from pygmt.clib import Session
from pygmt.helpers import (
build_arg_string,
deprecate_parameter,
fmt_docstring,
kwargs_to_strings,
use_alias,
)
__doctest_skip__ = ["grdimage"]
@fmt_docstring
@deprecate_parameter("bit_color", "bitcolor", "v0.10.0", remove_version="v0.12.0")
@use_alias(
A="img_out",
B="frame",
C="cmap",
D="img_in",
E="dpi",
G="bitcolor",
I="shading",
J="projection",
M="monochrome",
N="no_clip",
Q="nan_transparent",
R="region",
V="verbose",
n="interpolation",
c="panel",
f="coltypes",
p="perspective",
t="transparency",
x="cores",
)
@kwargs_to_strings(R="sequence", c="sequence_comma", p="sequence")
def grdimage(self, grid, **kwargs):
r"""
Project and plot grids or images.
Reads a 2-D grid file and produces a gray-shaded (or colored) map by
building a rectangular image and assigning pixels a gray-shade (or color)
based on the z-value and the CPT file. Optionally, illumination may be
added by providing a file with intensities in the (-1,+1) range or
instructions to derive intensities from the input data grid. Values outside
this range will be clipped. Such intensity files can be created from the
grid using :func:`pygmt.grdgradient` and, optionally, modified by
:gmt-docs:`grdmath.html` or :class:`pygmt.grdhisteq`. Alternatively, pass
*image* which can be an image file (geo-referenced or not). In this case
the image can optionally be illuminated with the file provided via the
``shading`` parameter. Here, if image has no coordinates then those of the
intensity file will be used.
When using map projections, the grid is first resampled on a new
rectangular grid with the same dimensions. Higher resolution images can
be obtained by using the ``dpi`` parameter. To obtain the resampled value
(and hence shade or color) of each map pixel, its location is inversely
projected back onto the input grid after which a value is interpolated
between the surrounding input grid values. By default bi-cubic
interpolation is used. Aliasing is avoided by also forward projecting
the input grid nodes. If two or more nodes are projected onto the same
pixel, their average will dominate in the calculation of the pixel
value. Interpolation and aliasing is controlled with the
``interpolation`` parameter.
The ``region`` parameter can be used to select a map region larger or
smaller than that implied by the extent of the grid.
Full option list at :gmt-docs:`grdimage.html`
{aliases}
Parameters
----------
grid : str or xarray.DataArray
The file name or a DataArray containing the input 2-D gridded data
set or image to be plotted (See GRID FILE FORMATS at
:gmt-docs:`grdimage.html#grid-file-formats`).
img_out : str
*out_img*\[=\ *driver*].
Save an image in a raster format instead of PostScript. Append
*out_img* to select the image file name and extension. If the
extension is one of .bmp, .gif, .jpg, .png, or .tif then no driver
information is required. For other output formats you must append
the required GDAL driver. The *driver* is the driver code name used
by GDAL; see your GDAL installation's documentation for available
drivers. Append a **+c**\ *args* string where *args* is a list
of one or more concatenated number of GDAL **-co** arguments. For
example, to write a GeoPDF with the TerraGo format use
``=PDF+cGEO_ENCODING=OGC_BP``. **Notes**: (1) If a tiff file (.tif)
is selected then we will write a GeoTiff image if the GMT
projection syntax translates into a PROJ syntax, otherwise a plain
tiff file is produced. (2) Any vector elements will be lost.
{frame}
{cmap}
img_in : str
[**r**].
GMT will automatically detect standard image files (Geotiff, TIFF,
JPG, PNG, GIF, etc.) and will read those via GDAL. For very obscure
image formats you may need to explicitly set ``img_in``, which
specifies that the grid is in fact an image file to be read via
GDAL. Append **r** to assign the region specified by ``region``
to the image. For example, if you have used ``region="d"`` then
the image will be assigned a global domain. This mode allows you
to project a raw image (an image without referencing coordinates).
dpi : int
[**i**\|\ *dpi*].
Set the resolution of the projected grid that will be created if a
map projection other than Linear or Mercator was selected [Default
is ``100`` dpi]. By default, the projected grid will be of the
same size (rows and columns) as the input file. Specify **i** to
use the PostScript image operator to interpolate the image at the
device resolution.
bitcolor : str
*color*\ [**+b**\|\ **f**\].
This parameter only applies when a resulting 1-bit image otherwise
would consist of only two colors: black (0) and white (255). If so,
this parameter will instead use the image as a transparent mask and
paint the mask with the given color. Append **+b** to paint the
background pixels (1) or **+f** for the foreground pixels
[Default is **+f**].
shading : str or xarray.DataArray
[*intensfile*\|\ *intensity*\|\ *modifiers*].
Give the name of a grid file or a DataArray with intensities in the
(-1,+1) range, or a constant intensity to apply everywhere (affects the
ambient light). Alternatively, derive an intensity grid from the input
data grid via a call to :func:`pygmt.grdgradient`; append
**+a**\ *azimuth*, **+n**\ *args*, and **+m**\ *ambient* to specify
azimuth, intensity, and ambient arguments for that function, or just
give **+d** to select the default arguments (``+a-45+nt1+m0``). If you
want a more specific intensity scenario then run
:func:`pygmt.grdgradient` separately first. If we should derive
intensities from another file than grid, specify the file with
suitable modifiers [Default is no illumination]. **Note**: If the
input data represent an *image* then an *intensfile* or constant
*intensity* must be provided.
{projection}
monochrome : bool
Force conversion to monochrome image using the (television) YIQ
transformation. Cannot be used with ``nan_transparent``.
no_clip : bool
Do **not** clip the image at the frame boundaries (only relevant
for non-rectangular maps) [Default is ``False``].
nan_transparent : bool or str
[**+z**\ *value*][*color*]
Make grid nodes with z = NaN transparent, using the color-masking
feature in PostScript Level 3 (the PS device must support PS Level
3). If the input is a grid, use **+z** to select another grid value
than NaN. If input is instead an image, append an alternate *color* to
select another pixel value to be transparent [Default is ``"black"``].
{region}
{verbose}
{panel}
{coltypes}
{interpolation}
{perspective}
{transparency}
{cores}
Example
-------
>>> import pygmt
>>> # load the 30 arc-minutes grid with "gridline" registration
>>> grid = pygmt.datasets.load_earth_relief("30m", registration="gridline")
>>> # create a new plot with pygmt.Figure()
>>> fig = pygmt.Figure()
>>> # pass in the grid and set the CPT to "geo"
>>> # set the projection to Mollweide and the size to 10 cm
>>> fig.grdimage(grid=grid, cmap="geo", projection="W10c", frame="ag")
>>> # show the plot
>>> fig.show()
"""
kwargs = self._preprocess(**kwargs) # pylint: disable=protected-access
with Session() as lib:
with lib.virtualfile_from_data(
check_kind="raster", data=grid
) as fname, lib.virtualfile_from_data(
check_kind="raster", data=kwargs.get("I"), required_data=False
) as shadegrid:
kwargs["I"] = shadegrid
lib.call_module(
module="grdimage", args=build_arg_string(kwargs, infile=fname)
)